Draytek Vigor2925 Series User Manual

Vigor2925 Series User’s Guide
443
Below shows the detected APs by clicking OK.
Available settings are explained as follows:
Item Description
Enable
Neighbor AP Detection – The access point(s) registered to
Vigor2925 will be used to detect other access points and send
the scanned results to Vigor2925. Later, the scanned result will
be displayed on this page.
Local WLAN Detection – The router will detect all the access
points through wireless LAN connection.
Specify the access points which are classified under each type.
Refresh Min(s)
Use the drop down list to specify the time to refresh the web
page.
Refresh
Click such link to refresh the web page immediately.
Ch
Display the channel used by the detected access point.

Draytek Vigor2925 Series Specifications

General

WAN Ports	2 x Gigabit Ethernet
LAN Ports	4 x Gigabit Ethernet
USB Ports	2 x USB 2.0
VPN Tunnels	50
Humidity	10% to 90% non-condensing
VPN Throughput	200 Mbps
Load Balancing	Yes
QoS	Yes
VPN Protocols	IPSec, PPTP, L2TP, SSL
Firewall	SPI
Power Supply	12V DC
Operating Temperature	0°C to 40°C
Storage Temperature	-25°C to 70°C
Wireless	Optional (with Vigor2925ac)