Vigor2925 Series User’s Guide
444
SSID
Display the SSID specified for the detected access point.
Mode
Display the mode (AP or Ad Hoc) used by the detected access
point.
BSSID
Display the MAC address of the detected access point.
Security
Display the encryption mode used by the access point.
Signal (%)
Display the signal strength (represented by percentage) sent by
the access point.
Beacon Period
Display the period (time) of the beacon. The beacon signal will
be sent out periodically.
Last Detected
Display the date and time that such access point detected by
Vigor router.
All the APs detected by Vigor router will be treated as unknown APs. You have to specify
which AP is friendly and which one is Rogue respectively. Follow the steps below to perform
the classification of access points.
1. Click the radio button on one of the access points. In this case, DrayTek-LAN-A is
selected.
2. Later, some options will appear on the bottom of the page.
Available settings are explained as follows:
Item Description
AP’s MAC Address
The MAC address of the selected AP will be displayed here
automatically.
AP’s SSID
The SSID of the selected AP will be displayed here
automatically.
To Next Page
Loading...
Need help?
General
