Vigor2925 Series User’s Guide
710
oname
It means Dial-Out Username.
“oname=admin” means to set Username = admin.
opwd
It means Dial-Out Password
“opwd=1234” means to set Password = 1234.
pauth
It means PPP Authentication.
“pauth=pc” means to set PPP Authentication = PAP&CHAP.
“pauth=p” means to set PPP Authentication = PAP Only
ovj
It means VJ Compression.
“ovj=on/off” means to enable/disable VJ Compression.
okey
It means IKE Pre-Shared Key.
“okey=abcd” means to set IKE Pre-Shared Key = abcd.
ometh
It means IPSec Security Method.
“ometh=ah/” means AH.
“ometh=espd/espda/” means ESP DES without/with
Authentication.
“ometh=esp3/esp3a/” means ESP 3DES without/with
Authentication.
“ometh=espa/espaa” means ESP AES without/with
Authentication.
sch
It means Index(1-15) in Schedule Setup.
sch=1,3,5,7 Set schedule 1->3->5->7
rcallb
It means Require Remote to Callback.
“rcallb=on/off” means to enable/disable Set Require Remote
to Callback.
ikeid
It means IKE Local ID.
“ikeid=vigor” means Set Local ID = vigor.
For Dial-In Settings
itype
It means Allowed Dial-In Type. Available settings include:
“itype=t” means PPTP.
“itype=s” means IPSec.
“itype=L1”means L2TP (None).
“itype=L1” means L2TP(Nice to Have).
“itype=l2” means L2TP(Must).
peer
It means specify Peer VPN Server IP for Remote VPN
Gateway.
Type “203.12.23.48” means to allow VPN dial-in with IP
address of 203.12.23.48.
Type “off” means any remote IP is allowed to dial in.
peerid
It means the peer ID for Remote VPN Gateway.
Type “draytek” means the word is used as local ID.
iname
It means Dial-in Username.
“iname=admin” means to set username as “admin”.
To Next Page
Loading...
Need help?
General
