Vigor2925 Series User’s Guide
742
wl dual config mode show
wl dual config channel [number]
wl dual config channel show
wl dual config preamble [enable]
wl dual config preamble show
wl dual config ssid [ssid_num enable ssid_name]
wl dual config ssid hide [ssid_num enable]
wl dual config ssid show
wl dual config ratectl [ssid_num enable upload download]
wl dual config ratectl show
wl dual config isolate lan [ssid_num enable]
wl dual config isolate member [ssid_num enable]
wl dual config isolate vpn [ssid_num enable]
wl dual config isolate show
S
S
y
y
n
n
t
t
a
a
x
x
D
D
e
e
s
s
c
c
r
r
i
i
p
p
t
t
i
i
o
o
n
n
Parameter Description
enable[value]
It means to enable/disable the 5GHz wireless function.
1: enable
0: disable
show
It means to display if 5G wireless function is enabled or not.
mode[value]
It means to select connection mode for wireless connection.
Available settings are: "11a", "11n_5g", "11n" and "11an".
mode show
It means to display what the current wireless mode is.
channel [number]
It means the channel of frequency of the wireless LAN.
The available settings are: 36, 40, 44, 48, 52, 56, 60, 64, 100,
104, 108, 112, 116, 120, 124, 128, 132, 136 and 140.
number=0, means Auto
number=36, means Channel 36
….
Number=52, means Channel 52.
channel show
It means to display what the current channel is.
preamble [enable]
It means to define the length of the sync field in an 802.11
packet.
Most modern wireless network uses short preamble with 56
bit sync field instead of long preamble with 128 bit sync
field. However, some original 11b wireless network devices
only support long preamble.
0: disable to use long preamble.
1: enable to use long preamble.
preamble show
It means to display if preamble is enabled or not.
To Next Page
Loading...
Need help?
General
