Implementing and Handling Applications
▲
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
DS1103 Hardware Installation and Configuration March 2004
I■■■■■■■■■■■■■
▼
114
■■■■■■■■■■■■■■■▼
3. As soon as the real-time application is running on your hardware,
you can use ControlDesk to experiment with it. For some basic
information on how to create a ControlDesk experiment and
observe the variables and change parameters of a running
real-time application, see Experimenting with ControlDesk on
page 126.