Iā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā
DS1103 Hardware Installation and Configuration March 2004
195
ā²ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā
Mapping of I/O Signals
The following table lists the I/O signals of the DS1103 by function
groups, their electrical specifications, and the mapping of these signals
to RTI blocks and RTLib functions.
The table also provides the mapping of the I/O signals to the I/O pins
on the DS1103, on the Sub-D connectors, and on the
CP1103/CLP1103 connector panels.
To Next Page
Loading...
