dSPACE DS1103 Hardware Installation And Configuration

Data Sheets ▲ ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
■
DS1103 Hardware Installation and Configuration March 2004
I■■■■■■■■■■■■■ ▼
222
■■■■■■■■■■■■■■■▼
PX10 Data Sheet
The following table provides the technical characteristics of the PX10:
Parameter Specification
Chassis
1)
• Desktop box
• 10 full-size 16-bit ISA slots
• 1 slot reserved for Link Board or slot CPU board for
Ethernet connection
• 1 additional slot required if AutoBoot option is used
• Fan cooling
Power supply • 85 … 265 V AC, autoranging
• 250 W (up to revision 1.2)
1)
• 300 W (as of revision 1.3)
Maximum output current • 22 A @ 5 V (up to revision 1.2)
• 33 A @ 5 V (as of revision 1.3)
Reset switch • The switch has no function.
• The lamp in the switch lights up when the expansion box
power supply provides +12 V.
• Approx. 10,000 h life span of the lamp
Grounding Circuit ground is connected to the chassis and through that
to the power system’s protective ground.
Physical size
(height x width x depth)
164 x 344 x 444 mm (6.5 x 13.5 x 17.5 in)
Weight (without boards) 11.3 kg (24.9 lbs)
Ambient temperature 0 … 50 °C (32 … 122 °F)
Humidity 0 … 95 %, non-condensing
1) As of revision 1.3, the revision number is labeled on the chassis and the PX10 is prepared for inserting the DS1006 Processor
Board. For more details on the different revisions, refer to http://www.dspace.de/goto?pxboxvers.

dSPACE DS1103 Specifications

General

Brand	dSPACE
Model	DS1103
Category	Controller
Language	English