dSPACE DS1103 Hardware Installation And Configuration

Before You Start ▲ ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
■
DS1103 Hardware Installation and Configuration March 2004
I■■■■■■■■■■■■■ ▼
26
■■■■■■■■■■■■■■■▼
Installation and Configuration
Overview
C
CAUTION! Changing the installation sequence may lead to
unpredictable results or even damage the system.
■ Install the components of your system in exactly the order stated.
■ Read the instructions carefully before starting installation.
■ Consider all warnings given.
Installation sequence Installing the DS1103 requires the following steps in the specified
order.
1. Check whether the software has been installed on the host PC.
You must first install the software before installing any hardware
component in the host PC and before connecting an expansion
box to it. For detailed instructions on installing the software, refer
to Installing dSPACE Software in the dSPACE Software Installation
and Management Guide.
N
You need administrator rights to install dSPACE software.
2. Check whether your hardware meets the requirements for
DS1103. Refer to Checking the System Requirements on page 28.
3. Check if the default setting of the board must be changed. Refer
to Setting up the DS1103 on page 36.
4. Now you can install the hardware. Refer to How to Install dSPACE
Boards on page 40.
5. If the DS1103 is installed in an expansion box, connect the box to
your host PC. Refer to Connecting an Expansion Box to the Host
PC on page 51.

dSPACE DS1103 Specifications

General

Brand	dSPACE
Model	DS1103
Category	Controller
Language	English