dSPACE DS1103 Hardware Installation And Configuration

■
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ ▼ Troubleshooting
DS1103 Hardware Installation and Configuration March 2004
245
▲ ■■■■■■■■■■I
▲■■■■■■■■■■■■■■■
Expansion Box (Bus Connection)
You should follow these guidelines when connecting the host PC to an
expansion box via a bus interface:
■ When switching on the system, the expansion box should usually
be switched on first, followed by the PC.
■ Do not switch off the expansion box while the PC is still running.
This might lead to unpredictable errors.
■ If you already installed other PC cards, problems may occur when
you install the DS815 under Windows NT. For details, see Using the
DS815 with Other PC Cards Under Windows NT on page 246.
■ If you use the DS815 together with third-party socket services,
problems may occur when you install the DS815. In this case, use
the software of the third-party socket service to reconfigure the
resource settings of the DS815.

dSPACE DS1103 Specifications

General

Brand	dSPACE
Model	DS1103
Category	Controller
Language	English