Documentation Overview
ā²
ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā
DS1103 Hardware Installation and Configuration March 2004
Iā ā ā ā ā ā ā ā ā ā ā ā ā
ā¼
12
ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā¼
About This Document
This document will show you the installation and configuration of the
DS1103 PPC Controller Board.
It describes the hardware installation procedure, shows how to
configure the system, and explains how to get started with your
dSPACE system using an appropriate example.
Knowledge in handling the host PC and the Microsoft Windows
operating system is presupposed.
Legend
The following symbols are used in this document.
C
Warnings provide indispensable information to avoid severe damage
to your system and/or your work.
N
Notes provide important information that should be kept in mind.
T
Tips show alternative and/or easier work methods.
E
Examples illustrate work methods and basic concepts, or provide
ready-to-use templates.