To Next Page

To Previous Page

■

■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■

▼

Implementing and Handling Applications

DS1103 Hardware Installation and Configuration March 2004

123

▲

■■■■■■■■■■I

▲■■■■■■■■■■■■■■■

How to Handle Applications on the

DS1103

To handle applications on the DS1103, the following instructions

apply:

To download and start a real-time application on the PowerPC

➤ In the File Selector, select the system description file (SDF) for the

real-time processor, and drag & drop it onto the board icon in the

Platform Navigator.

The object file is loaded to and started on the real-time processor.

Alternatively, from the menu bar, choose Platform –

Application – Load Application.

Stopping a

real-time application

If you stop an application via ControlDesk‘s Stop Real-Time

Processor command, the processor will be reset immediately.

Therefore, the termination code will not be executed and the

background task will no longer be active. As a result, the I/O will not

output the termination values of the application. To avoid problems

with undefined termination values, use RTI’s simulation control

(RUN/STOP mechanism) for stopping and reloading applications (see

Simulation Control (RUN/STOP Mechanism) in the RTI and RTI-MP

Implementation Guide).

dSPACE DS1103 Hardware Installation And Configuration

Other manuals for dSPACE DS1103