To Next Page

To Previous Page

Implementing and Handling Applications

▲

■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■

■

DS1103 Hardware Installation and Configuration March 2004

I■■■■■■■■■■■■■

▼

124

■■■■■■■■■■■■■■■▼

To stop a real-time application

1 In the Platform Navigator, select the board.

2 From the menu bar, choose Platform – Application –

Stop Real-Time Processor.

Or you can click the Stop RTP/Simulation icon in the Platform

toolbar.

The program running on the real-time processor is stopped.

To reload a real-time application

1 In the Platform Navigator, select the board.

2 From the menu bar, choose Platform – Application –

Reload Application.

Or you can click the Reload Application/Start Simulation icon in the

Platform toolbar.

The application that was previously downloaded to the real-time

processor is started.

dSPACE DS1103 Hardware Installation And Configuration

Other manuals for dSPACE DS1103