dSPACE DS1103 Hardware Installation And Configuration

■■
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ ▼ Using the AutoBoot Option
DS1103 Hardware Installation and Configuration March 2004
153
▲ ■■■■■■■■■■I
▲■■■■■■■■■■■■■■■
Further Information on Using
AutoBoot Option
This section provides some general instructions on Autoboot Option.
For detailed information, see:
■ How to Connect the PC to the Expansion Box when the Autoboot
Application is Running on page 153
■ How to Load Slave Applications on page 153
■ How to Handle AutoBoot Applications with Long File Names on
page 154
How to Connect the PC to the Expansion
Box when the Autoboot Application is
Running
You can connect your host PC to the expansion box and run
ControlDesk after the application is autobooted without having to
restart or interrupt the application.
To connect the host PC to the expansion box and run
ControlDesk after the application is autobooted
1 From ControlDesk’s menu bar, choose Platform – Change
Connection. Enter the IP address of your expansion box.
ControlDesk connects to the expansion box and automatically
detects that an application is running.
2 In ControlDesk’s Insert Directory for AutoBoot Option dialog,
specify the AutoBoot directory on the host PC containing the
application.
How to Load Slave Applications
N
You cannot load a slave application to the slave DSP of the DS1103.

dSPACE DS1103 Specifications

General

Brand	dSPACE
Model	DS1103
Category	Controller
Language	English