EasyManua.ls Logo

dSPACE DS1103 - Connecting via Ethernet

Default Icon
254 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connecting an Expansion Box to the Host PC
ā–²
ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– 
ā– 
DS1103 Hardware Installation and Configuration March 2004
Iā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– 
ā–¼
54
ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā– ā–¼
Using Link Boards: Alternatives and
Limitations
Before using link boards you should familiarize yourself with the
alternatives and limitations that apply to dSPACE’s link boards:
ā–  Refer to Alternatives below.
ā–  Refer to Limitations on page 55.
Alternatives
If you use a bus interface to connect the host PC to an expansion box,
you currently have the three alternatives listed in the following table.
DS813 Link Board (PC) The DS813 to be installed in the host PC is an ISA bus interface, and
requires a free 16-bit ISA slot in the host PC. The DS813 supports the
ISA Plug & Play mode: the PC’s BIOS or operating system automatically
assigns the I/O addresses actually used by the board.
DS814 Link Board (Box) The DS814 Link Board (Box) must be installed in the expansion box. It
requires a free 16-bit ISA slot in the expansion box.
DS815 Link Board (PC) The DS815 to be installed in the host PC is a PC card, and requires a
free PC card slot in the host PC. The DS815 always works in
plug & play mode: the operating system automatically assigns the
I/O addresses actually used by the board.
N
If you work with Windows NT, use the PC card support supplied with
Windows NT instead of third-party PC card software.
Link Boards (PC) Link Boards (Box)
DS813 DS814
DS815 DS814
DS817 DS814

Table of Contents

Other manuals for dSPACE DS1103

Related product manuals