ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā
ā¼
Troubleshooting
DS1103 Hardware Installation and Configuration March 2004
247
ā²
ā ā ā ā ā ā ā ā ā ā I
ā²ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā
3 In the DS815 Configuration Utility dialog, specify the IRQ value
and I/O Port value for the DS815.
N
Make sure that these resources are not used by other PC cards or
PC components.
4 Click OK.
5 Reboot the PC to apply the new settings.
To Next Page
Loading...
