dSPACE DS1103 Hardware Installation And Configuration

Installing the Hardware ▲ ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
■
DS1103 Hardware Installation and Configuration March 2004
I■■■■■■■■■■■■■ ▼
32
■■■■■■■■■■■■■■■▼
Connector panels
/LED panels
Connector panels provide easy-to-use connections between the board
and external devices. If you use connector panels, refer to Installing
Connector and LED Panels on page 44.
AutoBox AutoBox is an expansion box for in-vehicle control experiments. After
the dSPACE boards are installed in an AutoBox, the AutoBox itself has
to be installed in a vehicle. For detailed instructions, refer to Installing
AutoBox in a Vehicle on page 47.
PX20 Expansion Box The PX20 Expansion Box is available as either a desktop box or a
rack-mount version. However, you can also install the desktop box in a
standard 19’’ rack. For details, refer to Mounting a PX20 Expansion
Box in a 19'' Rack on page 50.

dSPACE DS1103 Specifications

General

Brand	dSPACE
Model	DS1103
Category	Controller
Language	English