To Next Page

To Previous Page

Setting Up an Ethernet Connection Between PC and Expansion Box

▲

■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■

■

DS1103 Hardware Installation and Configuration March 2004

I■■■■■■■■■■■■■

▼

■■■■■■■■■■■■■■■▼

How to Change the Host Table

(Windows 2000/Windows XP)

An IP address is a 32-bit number, usually written as a set of four 8-bit

numbers. For example, 192.100.100.98 is the default IP address of an

expansion box connected by Ethernet.

You can assign one or more alias names to each IP address via the host

table.

To edit the host table

1 Open a DOS window.

2 Change to

%System_ROOT%\system32\drivers\etc.

3 Type

edit hosts

4 Modify the host table according to your needs and save the

changes. The file

hosts.sam

can be used as an example of a host

file.

Lines beginning with “#” are comments. Multiple aliases for the same

IP address must be separated by a space.

dSPACE DS1103 Hardware Installation And Configuration

Other manuals for dSPACE DS1103