DURKOPP ADLER 513 - Changing Seam Patterns (P)

Programming
Operating Instructions 513/533 - 01.0 - 09/2023 35
Fig. 13: Checking seam patterns (P)
3. Lower the needle manually.
4. Press the buttons to check the seam pattern (P) stitch
by stitch.
5. Press the button to exit the menu.
4.2.4 Changing seam patterns (P)
Fig. 14: Changing seam patterns (P)
To switch a seam pattern (P):
1. Press the button.
 The LED goes out.
NOTICE
Property damage may occur!
The seam pattern (P) must match the sewing foot as sewing
foot and needle may otherwise collide, resulting in needle
breakage.
Select a seam pattern (P) that matches the sewing foot!