Programming
44 Operating Instructions 513/533 - 01.0 - 09/2023
4.3.3 Resetting the counter
Fig. 27: Resetting the counter
To reset the counter:
1. Once the counter value has elapsed, M-316 will be displayed.
2. To reset the counter, press the button.
The counter starts counting again.
B03 Piece Counter Plus Counter
Calculates the current value for 1 cyclical sewing
process by adding the numbers. If the current
value matches the set value, the menu that lets
you adjust the counter will be displayed.
B04 Piece Counter Minus Counter
Calculates the current value for 1 cyclical sewing
process by subtracting the number. When the
current value reaches 0, the menu that lets you
adjust the counter will be displayed.
B07 Counter not active
Icon Type Explanation
To Next Page
Loading...
