Setup
Operating Instructions 513/533 - 01.0 - 09/2023 93
6.3.6 Inserting the machine head
Important
When working with the machine head, always attach the hand-
piece (1) to the machine. Remove the handpiece (1) again when
the work is complete. Take plugs from the accessory pack to close
the openings in the machine.
Fig. 63: Inserting the machine head
WARNING
Crushing possible!
Handling the machine in a careless manner can
lead to crushing of the limbs.
Always use caution when moving the machine.
Watch your limbs and do not hold them between
the machine and other objects.
(1) - Handpiece
(2) - Screws
(3) - Rubber piece
(4) - Washer
(5) - Nuts
(6) - Oil pan
To Next Page
Loading...
