Programming
Operating Instructions 513/533 - 01.0 - 09/2023 53
4.5.4 Copying/deleting a seam pattern sequence (C)
You can copy registered seam patterns (P) - as well as seam
pattern sequences (C) - to new seam patterns (P). You can also
delete existing seam patterns (P) or seam pattern sequences (C)
(except for the last seam pattern sequence (C)).
To copy/delete a seam pattern sequence (C):
1. Switch on the machine.
2. Press the button.
The system menu appears:
Fig. 39: Copying/deleting a seam pattern sequence (1)
3. Use the buttons to select the 06 Reg/del C pat
menu item.
4. Press the button to confirm.
5. Press the buttons to move or copy the new seam
pattern sequence number - or use the symbol to delete
the seam pattern sequence (C).
6. Press the buttons to select the symbol.
7. Confirm to create a new seam pattern sequence (C).
To Next Page
Loading...
