Programming
50 Operating Instructions 513/533 - 01.0 - 09/2023
4.5 Using a seam pattern sequence (C)
The machine lets you sew multiple seam patterns (P) in succes-
sion. One seam pattern sequence (C) can be comprised of up
to 99 seam patterns (P). The total number of seam pattern
sequences (C) that can be created is 99.
4.5.1 Selecting seam patterns (P) for a seam pattern
sequence (C)
Fig. 35: Selecting seam patterns (P) for a seam pattern sequence (C)
To select seam patterns (P) for a seam pattern sequence (C):
1. Select programming mode (LED off) by pressing
the button.
2. Select the seam pattern sequence (C) mode by pressing
the buttons in order to toggle between the numbers
of the seam pattern sequences (C) and those of the seam
patterns (P).
3. Finish your selection of the seam patterns (P) by pressing the
button.
The LED illuminates, and the machine is ready for sewing.
You can use the buttons to select the seam pattern with
which you wish to start.
Fig. 36: Selecting seam patterns for a seam pattern sequence
To Next Page
Loading...
Need help?
General
