DURKOPP ADLER 513 - Page 51

Programming
Operating Instructions 513/533 - 01.0 - 09/2023 49
Fig. 34: Creating a new seam pattern (7)
25. The increment for the Y-axis can be set to 0.1 mm. Set the
value to -0.1 mm using the buttons.
26. Complete the setting with a press of the button .
27. Press the button to finish the seam pattern registration.
Information
When selecting P6 through P25, the user can use the combination
of the buttons for sewing by
pressing the buttons at the same time.
Button combination - seam pattern memory buttons
Memory
no.
Button
combo
Memory
no.
Button
combo
Memory
no.
Button
combo
Memory
no.
Button
combo
P1 P1 P8 P1 + P4 P15 P4 + P5 P22 P2 + P3 + P4
P2 P2 P9 P1 + P5 P16 P1 + P2 + P3 P23 P2 + P3 + P5
P3 P3 P10 P2 + P3 P17 P1 + P2 + P4 P24 P2 + P4 + P5
P4 P4 P11 P2 + P4 P18 P1 + P2 + P5 P25 P3 + P4 + P5
P5 P5 P12 P2 + P5 P19 P1 + P3 + P4
P6 P6 P13 P3 + P4 P20 P1 + P3 + P5
P7 P7 P14 P3 + P5 P21 P1 + P4 + P5