Setup
Operating Instructions 513/533 - 01.0 - 09/2023 87
6.3.2 Assembling the stand
Fig. 56: Assembling the stand
To assemble the stand:
1. Turn the adjusting wheel (1) to ensure that the stand is set up
securely. All 4 feet of the stand must be in contact with the floor.
2. Screw the pedal (2) to the stand strut (3).
3. Slide the pedal (2) so that it sits in the middle of the stand
strut (3). The stand strut (3) has elongated holes to allow for
alignment.
(1) - Adjusting wheel
(2) - Pedal
(3) - Stand strut
To Next Page
Loading...
