Programming
Operating Instructions 513/533 - 01.0 - 09/2023 59
4.8 Copying/deleting seam patterns (P)
Standard seam patterns with numbers 001 through 100 cannot be
deleted. It is only possible to copy or delete seam patterns (P) and
seam pattern sequences (C) (the last seam pattern sequence (C)
cannot be deleted).
To copy/delete a seam pattern (P):
1. Switch on the machine.
2. Press the button.
The system menu appears:
Fig. 43: Copying/deleting seam patterns (P)
3. Use the buttons to select the 05 Copy/del P pat
menu item.
4. Press the button to confirm.
5. Press the buttons to select the seam pattern (P) you
wish to copy.
6. To create a seam pattern number, press the buttons.
U245 Delete lubricant alert error Press RESET to delete -
No. Function Value range Unit Default
To Next Page
Loading...
Need help?
General
