Setup
94 Operating Instructions 513/533 - 01.0 - 09/2023
To insert the machine head:
1. Attach the oil pan (6) at the corresponding position on the table-
top using the screws (2).
2. Slip the rubber piece (3) onto the shaft
3. Fix the machine in place. To do so, fit and attach the washer (4)
followed by the lock nut (5).
6.3.7 Mounting the control panel
Fig. 64: Mounting the control panel
How to mount the control panel:
1. Mount the control panel (1) on the machine with screws (2),
adjusting the inclination of the control panel (1) via the slotted
hole.
2. Connect plug (3) with receptacle (4).
(1) - Control panel
(2) - Screws
(3) - Plug
(4) - Receptacle
To Next Page
Loading...
