Programming
40 Operating Instructions 513/533 - 01.0 - 09/2023
Fig. 21: Pausing sewing (4)
4. 3 different operations are then possible:
• Press pedal forward to begin sewing
• Continue sewing after a correction: To cut off the thread,
press the button while using the buttons to
adjust the position. Next, press the pedal forward to begin
sewing
• Cancel the seam: To cut off the thread, press the but-
ton. To return to the starting point, press the button.
4.2.8 Shifting the zero point
This is a global setting, i.e. a setting that applies to all seam
patterns stored on the machine.
Fig. 22: Shifting the zero point
To shift the zero point:
1. Press the button.
The clamp lowers.
To Next Page
Loading...
Need help?
General
