DURKOPP ADLER 513 - Set Button Sewing Function (for 533)

Programming
64 Operating Instructions 513/533 - 01.0 - 09/2023
4.11 Set button sewing function (for 533)
To set the button sewing function:
1. Press the button so that the LED goes out.
2. Press the button for at least 3 seconds until a sound is
heard.
3. Release the button.
 The system menu appears:
Fig. 48: Set button sewing function (for 533) (1)
4. Use the buttons to select the menu item
12 Sys K param.
5. Press button to confirm.
6. Use the buttons to select parameter K241.
NOTICE
Property damage may occur!
An incorrect presser foot can permanently damage the
machine.
ALWAYS mount the appropriate presser foot when switching
to the button sewing function.