Programming
Operating Instructions 513/533 - 01.0 - 09/2023 63
Fig. 46: Activating/deactivating standard seam patterns (1)
2. Use the buttons to select the 03 Normal pat lock
menu item.
3. Press the button to confirm.
The display shows the submenu for activating/deactivating
the standard seam patterns:
Fig. 47: Activating/deactivating standard seam patterns (2)
4. Use the buttons to select the seam pattern number (1).
5. Use the buttons to active or deactivate the standard
seam pattern.
6. To save the settings, press the button.
The settings have been saved, and you have been returned
to the system menu.
7. Press the button again.
The machine is ready to sew again.
(1) - Seam pattern number (2) - Status On/Off
To Next Page
Loading...
Need help?
General
