Programming
60 Operating Instructions 513/533 - 01.0 - 09/2023
Information
This setting allows the user to select the icon and confirm
the selection with the button.
7. Press the button to save the setting.
8. Press the button to exit the saving process.
4.9 Importing/exporting seam patterns
The user can import seam patterns (bearing numbers 101 through
200) to the control panel of the machine using a USB key. The
USB key can also be used to export seam patterns (bearing
numbers 101 to 200) that are stored on the control panel.
Requirements:
• use the Pattern Design software (which can be ordered
from Dürkopp Adler under material number 0513 590024)
to create a seam pattern in .VDT format
• Description with XXX.VDT (XXX must be a number
between 101 and 200)
• Seam pattern must be saved in a folder under the name
DH_PAT (on the top directory level of the USB key)
To import/export a seam pattern:
1. Switch on the machine.
2. Press the button.
The system menu appears:
To Next Page
Loading...
Need help?
General
