Maintenance
76 Operating Instructions 513/533 - 01.0 - 09/2023
5.1 Cleaning
Sewing dust and thread residues should be removed after every
8 operating hours using a compressed air gun or a brush. If very
fluffy sewing material is being sewn, the machine must be cleaned
more frequently.
A clean machine provides protection from faults.
WARNING
Risk of injury from flying particles!
Flying particles can enter the eyes, causing
injury.
Wear safety goggles.
Hold the compressed air gun so that the particles
do not fly close to people.
Make sure no particles fly into the oil pan.
NOTICE
Property damage from soiling!
Sewing dust and thread residues can impair the operation of
the machine.
Clean the machine as described.
NOTICE
Property damage from solvent-based cleaners!
Solvent-based cleaners will damage paintwork.
Use only solvent-free substances for cleaning.
To Next Page
Loading...
