DURKOPP ADLER 513 - Assembling the Machine Head Support; Adjusting the Working Height

Setup
88 Operating Instructions 513/533 - 01.0 - 09/2023
6.3.3 Assembling the machine head support
Fig. 57: Assembling the machine head support
To assemble the machine head support:
1. Insert the machine head support (1) into the hole (2) of
the tabletop.
6.3.4 Adjusting the working height
Fig. 58: Adjusting the working height
(1) - Machine head support (2) - Hole
①
②
(1) - Scale (2) - Screws
①
②