Setup
Operating Instructions 513/533 - 01.0 - 09/2023 89
The working height can be adjusted between 750 mm and 950 mm
(measured up to the upper edge of the tabletop). The stand height
should correspond to the physical characteristics of the operator.
To adjust the working height:
1. Loosen the screws (2) on both of the stand bars.
2. To avoid jamming, slide the tabletop in or out evenly at both
sides.
The scales (1) on the outer sides of the bars serve as an
adjustment aid.
3. Tighten both screws (2).
To Next Page
Loading...
Need help?
General
