Programming
36 Operating Instructions 513/533 - 01.0 - 09/2023
2. To set the desired seam pattern numbers, press the
buttons. You can adjust the scaling of the X- and Y-axis and
the speed as described here p. 32.
3. Press the button.
The LED illuminates, and the machine is ready for sewing.
Important
Toggling between standard seam patterns, seam patterns (P)
or seam pattern sequences (C) requires that the customer has
registered at least one seam pattern (P).
4.2.5 Sewing
Fig. 15: Sewing
To sew:
1. Place the sewing material under the sewing foot.
2. Press the pedal to position 1 (1) to lower the sewing foot
and release it to raise the sewing foot again.
3. Press the pedal to position 2 (2) to begin sewing.
At the end of the sewing process, the sewing foot is raised
and returns to its initial position.
(1) - Pedal position 1 (2) - Pedal position 2
To Next Page
Loading...
Need help?
General
