Table of Contents
2 Operating Instructions 513/533 - 01.0 - 09/2023
4.8 Copying/deleting seam patterns (P) ....................................................59
4.9 Importing/exporting seam patterns......................................................60
4.10 Activating/deactivating standard seam patterns.................................. 62
4.11 Set button sewing function (for 533)....................................................64
4.12 Performing a manual test run ..............................................................65
4.13 Table of standard seam patterns.........................................................66
4.14 Standard seam images for class 533 .................................................. 73
5 Maintenance.......................................................................................75
5.1 Cleaning ..............................................................................................76
5.2 Lubricating...........................................................................................78
5.2.1 Checking the oil level ..........................................................................79
5.2.2 Lubricating with grease .......................................................................81
6 Setup .................................................................................................. 85
6.1 Checking the scope of delivery ...........................................................85
6.2 Removing the transport locks..............................................................86
6.3 Assembly.............................................................................................86
6.3.1 Checking and assembling tabletops....................................................86
6.3.2 Assembling the stand ..........................................................................87
6.3.3 Assembling the machine head support ...............................................88
6.3.4 Adjusting the working height ...............................................................88
6.3.5 Unpacking the machine head..............................................................90
6.3.6 Inserting the machine head .................................................................93
6.3.7 Mounting the control panel ..................................................................94
6.3.8 Assembling the oil collection tray ........................................................95
6.3.9 Electrical connection ...........................................................................96
6.3.10 Checking the mains voltage ................................................................96
6.3.11 Mounting line filter ...............................................................................96
6.3.12 Connecting pedal ................................................................................97
6.3.13 Assembling the needle breakage protection .......................................98
6.4 Fitting the button container (class 533) ............................................... 99
6.5 Sewing test........................................................................................100
7 Decommissioning ...........................................................................101
8 Disposal ...........................................................................................103
9 Troubleshooting ..............................................................................105
9.1 Customer Service..............................................................................105
9.2 Messages of the control ....................................................................105
9.3 Messages of the software/control panel............................................113
9.4 Errors in sewing process ...................................................................118
10 Technical data ................................................................................. 121
To Next Page
Loading...
Need help?
General
