8.6 Selecting output elements
The programme serves for checking the function of the output
elements.
Caution: Danger of bodily injuries !
Do not introduce your hands into the running machine when checking
the function of the output elements.
–
Select the function "
Checking output elements
".
–
Enter the Code number of the desired output element by the
numerical keys.
The code numbers correspond to the circuit diagram codes (see
the following tables).
–
The display shows the circuit state (
ON/OFF
) of the selected
output element.
–
Switch on and off the selected output element by pressing the
function key "
F4
" in inching mode.
–
Press the function key "
F1
" in order to quit the checking
programme.
Output- Function
element
Y01 Lifting outer frame
Y02 Lowering outer frame
Y03 Advancing outer frame
Y04 Returning outer frame
Y05 Lifting middle slide
Y06 Lowering middle slide
Y07 Advancing middle slide
Y08 Returning middle slide
Y09 Middle slide, adjustment position
Y10 Advancing lateral slide
Y11 Returning lateral slide
Y12 Advancing front slide
Y13 Returning front slide
Y14 Sucking middle slide
Y15 Quick change
Y16 Middle slide correction
Y24 Free cycle lamp
Y27 Returning the rest
Y28 Advancing the rest
Y29 Closing inner shackle
Y30 Opening inner shackle
Y31 Closing outer shackle
Y32 Opening outer shackle
Y33 Thread cutter
Y34 Thread tension
Y35 Needled cooling
Y36 Stroke position adjustment
Y37 Lifting sewing head
Y38 Lowering sewing head
Y39 Zick Zack (806-111)
Y39 Resetting lower thread monitor (806-121)
Y40 Lower thread monitor sensitivity (only 806-121)
Y41 Sensitive lower thread monitor
Y47 Lifting transfer plate
Y48 Lowering transfer plate
Y49 Advancing inner slide
Y50 Returning inner slide
Y51 Lifting inner slide
Y52 Lowering inner slide
Y53 Hose, counter pressure
Y54 Vacuum 1
Y55 Vacuum 2
Y56 Vacuum 3
103
To Next Page
Loading...
