DURKOPP ADLER 806 - Sensitivity of the Light Barrier; Lower Position of the Rollers of the Roller-Out

5.6 Sensitivity of the light barrier
The light barrier emits the signal "Part rolled out " , so that the stacking
process can be continued.
Caution: Danger of bodily injuries !
Do not introduce your hands into the area of the moving machine parts.
Rule and control
–
The LED should not light up when there is a piece of material
under the light barrier.
–
The LED should light up when there in no material under the light
barrier.
Correction
–
Turn the potentiometer 1 accordingly.
5.7 Lower position of the rollers of the roller-out
Caution: Danger of bodily injuries !
Turn off main switch.
Switch off the machine before adjusting the rollers.
Rule and control
In this position, the foam ring at the roller 2 should be slightly
compressed.
–
Switch off the machine.
–
Press down the roller.
Correction
–
Loosen the screws 3 and 4.
–
Shift the cylinder, retained by the screws 3 and 4, sideways.
–
Retighten the screws 3 and 4.
1
2
3
4
87