DURKOPP ADLER 806 - Checking the Roll-Out; Checking the Sewing Motor

6.6 Checking the roll-out
The roll-out menu can be selected by the function "
Checking roll-out
".
Following symbols are used for setting the roll-out speed.
Each symbol can be switched on and off individually. Each symbol has
a different value, permitting to set 15 rotating speeds.
1 2 4 8
The figure under the symbol indicates the value of the symbol. If only
the left symbol has been selected, the roll-out will correspond to the
rotating speed "1". If all symbols have been selected, the rotating
speed will correspond to "1+2+4+8=15".
The roll-out can be stopped by the function "
stop roll-out
".
Additional functions for setting the roll-out
Following functions can be released by the keys 1, 2 and 3 of the
numerical keyboard:
Key 1: Lifting all rollers
Key 2: Lowering the roll-out roller
Key 3: Lowering the advance roller (if available)
When quitting this menu by the key F1, the motor of the roll-out roller
will be switched off, the roll-our roller and the advance roller will be
lifted.
6.7 Checking the sewing motor
Call up the function "
Checking the sewing motor
" by the sewing
motor menu.
The respective functions of this menu, that are required for setting the
sewing machine head, are mentioned in the respective sections of the
Service Instructions.
92