DURKOPP ADLER 806 - Lateral Slide, Front Slide and Corner Slide; General Information; Front Position of the Slide

4.4 Lateral slide. front slide and corner slide
4.4.1 General information
These slides are folding the cut pocket fabric around the middle slide
when the latter has been taken into the folding position by the inner
frame.
4.4.2 Front position of the slide
Caution: Danger of bodily injuries !
Do not introduce your hands into the area of the moving machine parts.
Rule and control
The lateral X distance of the slide 2 in respect to the middle slide 1
should correspond to the middle fabric thickness.
–
Select the "
Single step mode
" function.
–
Press the "
Start
" key as often as required.
Correction
–
Loosen the screws 3.
–
Adjust the lateral slide sheet 2 accordingly.
–
Close the screws 3.
1 2
2 3
78