DURKOPP ADLER 806 - Limiting the Movement Middle Slide up

4.3.3 Limiting the movement "Middle slide up"
Caution: Danger of bodily injuries !
Do not introduce your hands into the area of the moving machine parts.
Rule and control
The upwards movement of the middle slide must be limited by the
levers 2 on the outer frame and not by the cylinder "Middle slide up".
–
Move the setting wheel 1 in "11" position.
–
Select the "
Single step mode
" function.
–
Call up the respective step by the "Start" key.
Correction
–
Loosen the counter nut 3.
–
Turn the piston rod 4 accordingly.
–
Tighten the counter nut 3.
1
2
3 4
74