10. Start messages
10.1 Start screen
When starting the 806, the start screen will present the
DÜRKOPP ADLER Logo.
Following details will be displayed :
–
The selected machine class.
–
The production date and the EPROM version for the two
processors.
–
Press the key "I".
The principal menu of the sewing unit will appear.
10.2 "MP GP" message
Sequence
–
The two symbols "MP" and "GP" will appear.
–
After a short while, the symbol "MP" and then the symbol "GP" will
be presented in an inverted mode.
–
The machine will stop with the message "MP GP" .
Disturbance causes
If the sewing unit stops with the message "MP GP" , this can be due
to one of the following causes:
–
The values or the adjustments have been changed in the
adjustment menu (see chapter 6), but the menu has not been
closed by the key "
F1
".
–
Hardware error of the Master CPU in RAM.
Eliminate the disturbance
–
Switch off the sewing unit.
–
Switch on the sewing unit.
Standard values for machine adjustments will be load.
The sewing unit will automatically branch into the adjustment
menu.
–
Make all adjustments as described under chapter 6.
–
Quit the adjustment menu by the key "
F1
".
The sewing unit will be restarted.
806
F1
F2
F3
F4
806-XXX
$Date: dd.mm.yy hh:mm $
$Revision: nn $ Axx BED N.SE
$Date: dd.mm.yy hh:mm $
$Revision: nn $ Axx STD N.SE
12 Mhz
107
To Next Page
Loading...
