DURKOPP ADLER 806 - Amount of the Lifting Gap (Position of the Finger Travel)

2.5.3 Amount of the lifting gap (position of the finger travel)
Caution: Danger of bodily injuries !
The machine must be in the position "Safe motor stop ".
Rule and control
The X distance between the lifted bobbin case and its holder should
correspond to the size of the thread used.
–
Lower the sewing head by the function "
Lifting/lowering the
sewing head
".
–
Press the key "
O
".
"Safe motor stop " will be switched on.
Correction
–
Loosen screw 1.
–
Change the position of the finger 2 accordingly.
–
Tighten the screw.
1 2
21