DURKOPP ADLER 806 - 4 Folding Device; Outer Frame; General Information; Folding Position of the Outer Frame

4. Folding device
4.1 Outer frame
4.1.1 General information
The outer frame supports following functional elements:
–
Lateral slide
–
Front slide
–
Corner slide
–
Corner slide (in)
–
Inner frame
4.1.2 "Folding position" of the outer frame
Caution: Danger of bodily injuries !
Do not introduce your hands into the area of the moving machine parts.
Rule and control
When the lifted outer frame is in its front position, its distance to the
fabric rest should amount to 85 mm.
–
Select the "
single step mode
" function.
–
Repeat pressing the key "
Start
" until the outer frame is in its
respective position.
Correction
–
Loosen the counter nut 1.
–
Turn the piston rod 2 until the distance of the lifted outer frame, in
the front position, to the fabric rest amounts to 85 mm.
–
Tighten the counter nut 1.
ATTENTION !
When the outer frame stands too deep, it can knock against the middle
slide.
1
2
68