Maintenance Manual (960-942) A-2
Handling the LCD Module
3. If the panel’s surface gets dirty, wipe it with cotton or a soft cloth. If it is
still dirty, try breathing on the surface to create a light condensate and
wipe it again.
If the surface is very dirty, we recommend a CRT cleaning agent. Apply
the agent to a cloth and then wipe the panel’s surface. Do not apply
cleanser directly to the panel.
4. If water or other liquid is left on the panel’s surface for a long period, it
can change the screen’s tint or stain it. Be sure to quickly wipe off any
liquid.
5. Glass is used in the panel, so be careful not to drop it or let it strike a
hard object, which could cause breakage or cracks.
To Next Page
Loading...
