Dynapac CA134 - Technical Specifications - Working Capacity

Technical specifications - Working capacity
ICA134-3EN2.pdf2012-04-13
Technical specifications - Working
capacity
Compaction dataCompaction data
Static linear load (D) 13 kg/cm 73 pliStatic linear load (D) 13 kg/cm 73 pli
Static linear load, with Ballast weight (D) 15 kg/cm 84 pliStatic linear load, with Ballast weight (D) 15 kg/cm 84 pli
Static linear load (PD) - - - -Static linear load (PD) - - - -
Static linear load, with Ballast weight (PD) - - - -Static linear load, with Ballast weight (PD) - - - -
Static linear load with ROPS (D) 13 kg/cm 73 pliStatic linear load with ROPS (D) 13 kg/cm 73 pli
Static linear load with ROPS and Ballast weight
(D)
15 kg/cm 84 pliStatic linear load with ROPS and Ballast weight
(D)
15 kg/cm 84 pli
Static linear load, with ROPS (PD) - - - -Static linear load, with ROPS (PD) - - - -
Static linear load with ROPS and Ballast weight
(PD)
- - - -Static linear load with ROPS and Ballast weight
(PD)
- - - -
Amplitude (D) 1.7 mm 0.067 inAmplitude (D) 1.7 mm 0.067 in
Amplitude (PD) 1.5 mm 0.060 inAmplitude (PD) 1.5 mm 0.060 in
Vibration frequency, amplitude 35 Hz 2100 vpmVibration frequency, amplitude 35 Hz 2100 vpm
Centrifugal force, amplitude (D/PD) 89 kN 20.000 lbCentrifugal force, amplitude (D/PD) 89 kN 20.000 lb
Note: The frequency is measured at high revs. The
amplitude is measured as the real value and not
the nominal.
21