Technical specifications - General
ICA134-3EN2.pdf2012-04-13
ROPS-bolts which are to be torque tightened
must be dry.
ROPS-bolts which are to be torque tightened
must be dry.
ROPS - bolts
Bolt dimensions : M16 (500082)Bolt dimensions : M16 (500082)
Strength class : 8.8Strength class : 8.8
Tightening torque : 190 NmTightening torque : 190 Nm
Hydraulic system
Opening pressure MPaOpening pressure MPa
Drive system 40.0Drive system 40.0
Supply system 2.1Supply system 2.1
Vibration system 23.0Vibration system 23.0
Control systems 14.0Control systems 14.0
Brake release 1.5Brake release 1.5
25
To Next Page
Loading...
