Operation - Starting
ICA134-3EN2.pdf2012-04-13
Operation - Starting
Before starting
Master switch - Switching on
1
Fig. Engine compartment
1. Master switch
Remember to carry out daily maintenance. Refer to
the maintenance instructions.
The master switch is located in the engine
compartment. Turn the key (1) to the on position. The
entire roller is now supplied with power.
The engine hood must be closed by unlocked
when operating, so that the battery voltage can be
quickly disconnected if necessary.
The engine hood must be closed by unlocked
when operating, so that the battery voltage can be
quickly disconnected if necessary.
Operator’s seat - Adjusting
1
Fig. Operator's seat
1. Length adjustment
Adjust the operator’s seat so that the position is
comfortable and so that the controls are within easy
reach.
The seat can be adjusted lengthways (1).
39
To Next Page
Loading...
