Maintenance - 50h
ICA134-3EN2.pdf 2012-04-13
Tires - Air pressure - Wheel nuts - Tightening
Fig. Wheels
1. Air valve
2. Wheel nut
1
2
Check the tire pressures using a pressure gauge.
If the tires are filled with fluid, the air valve (1) must be
in the "12 o'clock" position during pumping.
Recommended pressure: See Technical
Specifications.
Check the tire pressure.
When changing the tires it is important that both
of them have the same rolling radius. This is
necessary to ensure proper functioning of the
limited slip differential in the rear axle.
When changing the tires it is important that both
of them have the same rolling radius. This is
necessary to ensure proper functioning of the
limited slip differential in the rear axle.
Check the tightening torque on the wheel nuts (2) with
253 Nm (26 kpm).
Check both wheels and all nuts. (This only applies to a
new machine or newly fitted wheels).
Check the safety manual that accompanies the
roller before filling the tires with air.
Check the safety manual that accompanies the
roller before filling the tires with air.
Air cleaner
Check - Replacement of main filter
Replace the air cleaner's main filter when the
indicator shows red. The indicator is mounted on
the air cleaner's connecting pipe.
Replace the air cleaner's main filter when the
indicator shows red. The indicator is mounted on
the air cleaner's connecting pipe.
76
To Next Page
Loading...
