Maintenance, 10h
ICA134-3EN2.pdf2012-04-13
Brakes - Check
Check operation of the brakes as follows:Check operation of the brakes as follows:
Checking the emergency stop
Fig. Instrument panel
1. Emergency stop
2. Parking brake lamp
1
2
Drive the roller slowly forward. Hold the steering wheel
firmly and brace yourself for a sudden stop.
Press the emergency stop (1). The roller will stop
abruptly and the engine will be switched off.
After testing the brakes, set the forward/reverse lever
in neutral.
Pull out the emergency stop (1). Start the engine.
The roller is now ready for operation.
Refer also to the section in the manual on operation.
Brakes - Check
Check operation of the brakes as follows:Check operation of the brakes as follows:
Checking the parking brake
Fig. Instrument panel
1. Parkering brake switch
2. Parkering brake lamp
1
2
Drive the roller slowly forward. Hold the steering wheel
firmly and brace yourself for a sudden stop.
Push in the parking brake switch (1). The roller should
stop immediately with the engine running.
After testing the brakes, set the forward/reverse lever
in neutral.
Reset the parkering brake switch (1).
The roller is now ready for operation.
Refer also to the section in the manual on operation.
73
To Next Page
Loading...
