Maintenance - Maintenance schedule
ICA134-3EN2.pdf 2012-04-13
General
Periodic maintenance should be carried out after the
number of hours specified. Use the daily, weekly etc.
periods where number of hours cannot be used.
Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease.
Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease.
The manufacturer’s instructions found in the
engine manual also apply.
The manufacturer’s instructions found in the
engine manual also apply.
Every 10 hours of operation (Daily)
Refer to the contents to find the page number of the
sections referred to !
Pos. in
fig
Action CommentPos. in
fig
Action Comment
Before starting up for the first time on that dayBefore starting up for the first time on that day
1 Check for free circulation of cooling air1 Check for free circulation of cooling air
30 Check coolant level Refer to the engine manual30 Check coolant level Refer to the engine manual
2 Check the engine oil level Refer to the engine manual2 Check the engine oil level Refer to the engine manual
28 Refuel28 Refuel
6 Check fluid level in hydraulic reservoir6 Check fluid level in hydraulic reservoir
Test the brakesTest the brakes
After the FIRST 50 hours of operation
Refer to the contents to find the page number of the
sections referred to !
Pos. in fig Action CommentPos. in fig Action Comment
2 Change the engine oil and oil filter Refer to the engine manual2 Change the engine oil and oil filter Refer to the engine manual
3 Change the fuel filter Refer to the engine manual3 Change the fuel filter Refer to the engine manual
8 Change the hydraulic fluid filter8 Change the hydraulic fluid filter
68
To Next Page
Loading...
